Cross Hatch Cutter

Cross Hatch Cutter

Cross Hatch Cutter is used to conduct the adhesion test of coatings after full curing of paint film. It provides an instant assessment of the quality of the bond between the coatings and the substrate.
Test is carried out by performing cross cuts at right angles. Clean the test area with a brush after that adhesive tape is pasted by pressing with your thumb and pulling it off. Then observe for any adhesion failure. If the film does not remove from the substrate then it means that the adhesion test is passed by the coating.
These cross hatch cutters are used in paint and coating, pipe, automobile, steel and cosmetic industries for adhesion tests.
Cross hatch cutters are available according to IS , ISO, ASTM standards.

Thickness of the coating determines which type of cross hatch cutter is to be used for conducting the test.

Standard: ASTM D 3359, IS 101 (Part 5 /sec.2), ISO 2409

Download Brochure
Categories: , Product ID: 15081

Description

Cross Hatch Cutter is used to conduct the adhesion test of coatings after full curing of paint film. It provides an instant assessment of the quality of the bond between the coatings and the substrate.
Test is carried out by performing cross cuts at right angles. Clean the test area with a brush after that adhesive tape is pasted by pressing with your thumb and pulling it off. Then observe for any adhesion failure. If the film does not remove from the substrate then it means that the adhesion test is passed by the coating.
These cross hatch cutters are used in paint and coating, pipe, automobile, steel and cosmetic industries for adhesion tests.
Cross hatch cutters are available according to IS , ISO, ASTM standards.

Thickness of the coating determines which type of cross hatch cutter is to be used for conducting the test.

 

Coating ThicknessRangeNo. of teethGap between each teeth (mm)
Upto 60 µm1 mm111
From  60 – 120 µm2 mm62
Above  120 – 250 µm3 mm63

 

Standard: ASTM D 3359, IS 101 (Part 5 /sec.2), ISO 2409

Raj Make

Technical Specifications:

 

Accessories required for cross hatch cutter:
• Brush for cleaning surface.
• Magnifying lens for observation.
• DFT meter for determining dry film thickness.

Package Includes:
Cross hatch cutter, brush, manual and calibration certificate.

Ordering Information:
Ref No. 114/1 Cross Hatch Cutter 1 mm (IS Standard)
Ref No. 114/2 Cross Hatch Cutter 2 mm (IS Standard)
Ref No. 114/3 Cross Hatch Cutter 3 mm (IS Standard)
Ref No. 114/4 Cross Hatch Cutter 1 mm (ASTM Standard)
Ref No. 114/5 Cross Hatch Cutter 2 mm (ASTM Standard)
Ref No. 114/6 Cross Hatch Cutter 3 mm (ASTM Standard)
Ref No. 114/7 Cross Hatch Cutter 1 mm (ISO Standard)
Ref No. 114/8 Cross Hatch Cutter 2 mm (ISO Standard)
Ref No. 114/9 Cross Hatch Cutter 3 mm (ISO Standard)
Ref No. 114/10 Permacel Tape (9001) ( ISO Certified )
Ref No. 114/11 Scotch Tape (2409) ( ISO Certified)
Ref No. 114/12 Permacel USA Tape (ASTM D 3359)

Cross Hatch Cutter HSN code: 90278090
Tape HSN code: 39199010

Follow us on:
Website I Facebook I Instagram I Twitter I Linkedin I Pinterest I Blog I Blogger I YouTube